| 基于LabVIEW的液固挤压工艺监控系统研究 |
| |
| 引用本文： | 关俊涛,杨方,齐乐华,周计明.基于LabVIEW的液固挤压工艺监控系统研究[J].计算机测量与控制,2008,16(11):1629-1631,1649. |
| |
| 作者姓名： | 关俊涛 杨方 齐乐华 周计明 |
| |
| 作者单位： | 西北工业大学,机电学院,陕西,西安,710072 |
| |
| 基金项目： | 国家自然基金资助项目，航空科学基金资助项目，陕西省自然科学基金资助项目 |
| |
| 摘 要： | 针对液态浸渗挤压复合材料成形过程实施难度大、工艺参数和成形过程难以控制的现存问题,以PCI数据采集控制卡为核心,采用LabVIEW软件设计开发了工艺实时监控系统;实现了对工艺过程中重要参数的在线采集、显示与存储,利用该监控系统进行液固挤压复合材料实验,基本实现了对温度等关键工艺参数的过程控制;实验结果表明了该系统的可靠性,从而为真空吸渗挤压复合材料工艺的实际应用奠定了基础。
|
| 关 键 词： | 液固挤压 复合材料 串口通讯 LabVIEW |
Research on Real-time Monitoring System of Liquid-solid Extrusion Process of Composite Based on LabVIEW |
| |
| Guan Juntao,Yang Fang,Qi Lehua,Zhou Jiming.Research on Real-time Monitoring System of Liquid-solid Extrusion Process of Composite Based on LabVIEW[J].Computer Measurement & Control,2008,16(11):1629-1631,1649. |
| |
| Authors: | Guan Juntao Yang Fang Qi Lehua Zhou Jiming |
| |
| Affiliation: | (School of Mechatronic Engineering,Northwestern Polytechnical University,Xi’an 710072,China) |
| |
| Abstract: | A real-time monitoring system is developed,which is aiming at the difficulties of controlling liquid-solid extrusion process and the key parameters.Based on this system,the key parameters can be on-line collected,displayed and saved simultaneously.In addition,with this system the processing parameters can be controlled.Finally,the results from the acquisition proved that the system provides a feasible way to monitor the process and has established a foundation for practical application. |
| |
| Keywords: | liquid-solid extrusion composite serial communication LabVIEW |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
