| 基于ARM和Linux的注塑机上位控制器设计 |
| |
| 引用本文： | 岑海洪,杨艳娟.基于ARM和Linux的注塑机上位控制器设计[J].工业仪表与自动化装置,2010(6):23-26. |
| |
| 作者姓名： | 岑海洪 杨艳娟 |
| |
| 作者单位： | 华南理工大学机械与汽车工程学院,广州510641 |
| |
| 摘 要： | 把嵌入式技术应用到工业控制器设计领域上,以S3C2440为硬件核心芯片,嵌入式Linux为操作系统来构建整个上位控制系统。根据注塑机的实际需要,配置了LCD显示、键盘输入、控制、通信等模块,分析了系统的硬件构造,并重点阐述了Linux系统下各模块驱动程序的开发和基于Qt的人机界面实现。
|
| 关 键 词： | 嵌入式技术 Linux系统 上位机 GUI Qt |
Design of injection molding machine controller based on ARM and Linux |
| |
| CEN Haihong,YANG Yanjuan.Design of injection molding machine controller based on ARM and Linux[J].Industrial Instrumentation & Automation,2010(6):23-26. |
| |
| Authors: | CEN Haihong YANG Yanjuan |
| |
| Affiliation: | (School of Mechanical ＆ Automotive Engineering,South China University of Technology,Guangzhou 510641,China) |
| |
| Abstract: | Use embedded technology to industrial controller design.The whole upper control system is formed by S3C2440 which is used as the main chip and embedded Linux used as operation system.According to the actual needs of injection molding machine,configure the LCD display,keyboard input,control,communications module and so on.Analyse the system′s hardware structure,and focuses on how to implement the driver of each module under Linux system as well as the realization of human-machine interface. |
| |
| Keywords: | embedded technology Linux system upper-computer GUI Qt |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
