某型通用机枪大杠杆曲线参数优化研究

为解决某型通用机枪首发装填困难的故障，利用线位移传感器进行了首发装填试验，得到了影响首发装填的重要因素，即拨弹滑板在向外和向里2个阶段所受阻力传递到装填拉柄运动方向上的最大值；在大杠杆的两段曲线上各取5个点，利用三次样条曲线对这两条曲线进行拟合，求出了2个最大值与插值点之间的函数关系；分别以这2个最大值为目标函数，以各插值点的Y向坐标为待优化参数，利用遗传算法对大杠杆曲线进行了优化，使得2个目标函数分别减少了47.24%和39.3%，达到了优化的目的。为该枪的改进工作提供指导，所使用的方法为同类型武器的设计和改进提供参考。

Parameter Optimization of Big-lever Curve of a Dual-purpose Machine Gun

To solve the problem in first-round loading of a dual-purpose machine gun,the loading test was carried out by using a linear displacement sensor,and the importance factors which affect the first-round loading were revealed,i.e.two maximum values of resistances transferred from feed slide to the loading handle.Five points were taken in two segments of big-lever curve respectively,and the relationship between two maximum values and interpolation points were found out by using cubic spline curve fitting.Taken these two values as objective functions and the Y coordinates of interpolation points as the optimized parameters,the big-lever curves were optimized by using genetic algorithm,and the objective functions were reduced by 47.24% and 39.3%.The method can provide reference for the design and improvement of the similar weapons.