| 燃油式热熔釜3D建模及其温度场仿真 |
| |
| 引用本文： | 田军委,;邱望志,;张艳,;王岗罡.燃油式热熔釜3D建模及其温度场仿真[J].西安工业大学学报,2014(6):446-449. |
| |
| 作者姓名： | 田军委 ;邱望志 ;张艳 ;王岗罡 |
| |
| 作者单位： | [1]西安工业大学机电工程学院,西安710021; [2]中国人民解放军驻211厂军事代表室,北京100076 |
| |
| 基金项目： | 陕西省教育厅专项科学研究计划项目（2013JK1054） |
| |
| 摘 要： | 为了得到燃油热熔釜在稳态加热条件下热熔釜釜壁的温度场分布情况.文中采用热平衡计算法对燃油热熔釜系统燃烧室内的热量分布进行了理论分析,并在恒流密度加热情况下,利用Fluent软件对燃油热熔釜热熔釜壁的温度场进行了仿真分析.仿真结果表明:在热流密度q=9 809.1W/m2加热情况下,热熔釜壁釜壁平均温度为330℃,仿真结果跟实际测得数据基本相符.
|
| 关 键 词： | 燃油热熔釜 恒流密度加热 Fluent 温度场 |
Fuel Furnace 3D Modeling and Simulation of Temperature Field |
| |
| Authors: | TIAN Jun-wei;QIU Wang-zhi;ZHANG Yan;WANG Gang-gang |
| |
| Affiliation: | TIAN Jun-wei, QIU Wang-zhi, ZHANG Yan, WANG Gang-gang( 1. School of Mechatronic Engineering, Xi＇ an Technological University, Xi＇ an 710021, China 2. Military Representative Office of PLA in 211 Factary, Beijing 100076, China) |
| |
| Abstract: | In order to get the temperature distribution on tank wall of fuel thermal reactor under steady heating conditions ,the heat distribution system in the combustion chamber of fuel thermal reactor was analyzed by the heat balance calculations .The temperature field of thermal reactor wall ,heated at a constant current density ,is simulated using Fluent software .Simulation results show ：The average temperature of thermal reactor vessel wall ,heated at heat flux q= 9 809 .1 W/m^2 ,is 330 ℃ ,which is basically in line with the actual measured data . |
| |
| Keywords: | fuel thermal reactor constant current density heating Fluent temperature field |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
