首页 | 本学科首页   官方微博 | 高级检索  
     

基于CH372-USB总线芯片的FPGA控制器
引用本文:刘斌,唐小琦,宋宝,谢星葵.基于CH372-USB总线芯片的FPGA控制器[J].仪表技术与传感器,2012(5):17-19,26.
作者姓名:刘斌  唐小琦  宋宝  谢星葵
作者单位:1. 华中科技大学机械科学与工程学院,湖北武汉,430074
2. 深圳华中数控股份有限公司,广东深圳,518000
基金项目:国家自然科学基金,"高档数控机床与基础制造装备"科技重大专项
摘    要:USB逐渐成为现场调试和实时监测设备的标准接口,在比较了几种实现USB接口的方式后,采用FPGA与带USB底层协议的总线芯片来实现USB接口通信。采用FPGA作为主控芯片,设计了基于CH372-USB总线芯片的控制器,论述了控制器工作的原理和核心状态机的设计过程,解决了FPGA控制CH372时,CH372对时序和命令输入的要求。最后,搭建实验硬件平台,验证了该方案的可行性和有效性。

关 键 词:现场调试  通用串行总线  现场可编程门阵列  通信  状态机

FPGA Controller Based on USB Chip of CH372
LIU Bin , TANG Xiao-qi , SONG Bao , XIE Xing-kui.FPGA Controller Based on USB Chip of CH372[J].Instrument Technique and Sensor,2012(5):17-19,26.
Authors:LIU Bin  TANG Xiao-qi  SONG Bao  XIE Xing-kui
Affiliation:1.School of Mechanical Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,China; 2.Shenzhen Huazhong Numerical Control Co.,LTD,Shenzhen 518000,China)
Abstract:The USB interface has become one of the standard interfaces in real-time monitor and on-site debugging equipments.After comparied several methods to realize USB interface,FPGA and the USB chip of CH372 were chosen to realize the USB communication.This FPGA as the main chip,the controller was designed for CH372.The working principles and the state machine of the controller were discussed to meet the requirements of CH372’s timing and command input.Finally,the experimental platform was set up to verify the feasibility and effectiveness of the program.
Keywords:on-site debugging  universal serial bus  programmable gate array  communication  state machine
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号