| 工业纯Al的缝隙腐蚀再钝化电位 |
| |
| 引用本文： | 梁成浩.工业纯Al的缝隙腐蚀再钝化电位[J].金属学报,1994,30(16):165-168. |
| |
| 作者姓名： | 梁成浩 |
| |
| 作者单位： | 大连理工大学 |
| |
| 摘 要： | 工业纯Ａｌ的缝隙腐蚀再钝化电位ＥＲ是缝隙结构的特征值，与缝隙腐蚀下限电位ＶＣＲＥＶ一致，比孔蚀电位负约１００ｍＶ，说明缝隙腐蚀更易发生．
|
| 关 键 词： | 工业纯Al，缝隙腐蚀再钝化电位，孔蚀电位 |
REPASSIVATION POTENTIAL FOR CREVICE CORROSION OF COMMERCIALLY PURE ALUMINUM |
| |
| LIANG Chenghao.REPASSIVATION POTENTIAL FOR CREVICE CORROSION OF COMMERCIALLY PURE ALUMINUM[J].Acta Metallurgica Sinica,1994,30(16):165-168. |
| |
| Authors: | LIANG Chenghao |
| |
| Affiliation: | Dalian University of Technology |
| |
| Abstract: | The repassivation potential for crevice corrosion(ER) of commercially pure Al was measured successfully using the method developed for stainless steels.The ER is a characteristic value depending on the geometry of the crevice configuration.The ER coincides with that lower limit of critical potential VCREV for crevice corrosion.The results showed that ER of commercially pure Al was less noble than the pitting potential by 100 mV,confirming that crevice corrosion is the more easily occurring type even in commercially pure Al. |
| |
| Keywords: | commercially pure aluminum repassivation potential crevice corrosion pitting poteneial |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《金属学报》浏览原始摘要信息 |
|
点击此处可从《金属学报》下载全文 |
