| 新型水溶性芯模材料的研制 |
| |
| 引用本文： | 魏正方,曾黎明,王晶.新型水溶性芯模材料的研制[J].粘接,2007,28(2):13-15. |
| |
| 作者姓名： | 魏正方 曾黎明 王晶 |
| |
| 作者单位： | 武汉理工大学材料科学与工程学院,湖北,武汉,430070 |
| |
| 摘 要： | 将磷酸酯淀粉与刚性填料,通过共混制备了新型的水溶性芯模材料。并对其压缩强度、水溶性等进行了测试,分析了影响性能的各种因素。实验结果表明,在磷酸酯淀粉中加入质量分数10%的刚性填料所制得的水溶性芯模材料,具有强度高、表面光洁、水溶性好等特点。
|
| 关 键 词： | 水溶性芯模材料 磷酸酯淀粉 填料 水溶性 |
| 文章编号： | 1001-5922（2007）02-0013-03 |
| 修稿时间： | 2006-11-24 |
Development of a new water-soluble core-mould material |
| |
| WEI Zheng-fang,ZENG Li-ming,WANG Jing.Development of a new water-soluble core-mould material[J].Adhesion in China,2007,28(2):13-15. |
| |
| Authors: | WEI Zheng-fang ZENG Li-ming WANG Jing |
| |
| Affiliation: | College of Materials Science and Engineering, Wuhan University of Technology, Wuhan, Hubei 430070, China |
| |
| Abstract: | A new water soluble core-mould material was prepared by blending of phosphate ester starch and different fillings.Then,the compressive strength and water soluble behavior of the core-mould material were tested.The results showed that the content of filling was better to be 10% and the water soluble core-mould material had high strength,good glassy surface,good water-solubility,and so on. |
| |
| Keywords: | water soluble core-mould material phosphate-esterstarch filling water-solubility |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
