| 带凸缘阶梯筒形件的成形工艺研究 |
| |
| 引用本文： | 王艳辉.带凸缘阶梯筒形件的成形工艺研究[J].沙洲职业工学院学报,2001,4(2):11-14,18. |
| |
| 作者姓名： | 王艳辉 |
| |
| 作者单位： | 沙洲职业工学院,张家港,215600 |
| |
| 摘 要： | 通过对一个带凸缘的阶梯形筒形件的拉深工艺计算，说明带凸缘的阶梯筒形件的拉深工艺的计算方法。用该方法计算确定的拉深工艺，可以确保多次拉深过程中的拉深过渡形状不被拉断，最终拉出合格的工件。
|
| 关 键 词： | 带凸缘阶梯筒形件 拉深工艺 成形工艺 冲压工艺 工艺过程 计算方法 |
The Study of the Forming Process of Stepped Cylindrical Work-piece with Flange |
| |
| WANG Yan-hui.The Study of the Forming Process of Stepped Cylindrical Work-piece with Flange[J].Journal of Shazhou Polytechnical Institute of Technology,2001,4(2):11-14,18. |
| |
| Authors: | WANG Yan-hui |
| |
| Affiliation: | Shazhou Polytechnical Institute of Technology |
| |
| Abstract: | This paper illustrates the calculation method of forming stepped cylindrical work-piece with flange though an example of similar drawing work-piece. The method with which the drawing process have determined , makes it possible for the work-piece to avoid breaking in drawing ,and obtain a required work-piece finally. |
| |
| Keywords: | Flange Stepped cylindrical work-piece Drawing process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
