首页 | 本学科首页   官方微博 | 高级检索  
     

V_A棕榈酸酯微胶囊的制备及性能研究
引用本文:杜静玲,谭天伟.V_A棕榈酸酯微胶囊的制备及性能研究[J].食品与发酵工业,2007,33(1):48-50.
作者姓名:杜静玲  谭天伟
作者单位:北京化工大学北京市生物加工过程重点实验室,北京,100029
基金项目:国家自然科学基金;高等学校博士学科点专项科研项目;国家科技攻关计划
摘    要:以聚天冬氨酸和明胶为壁材,采用单凝聚结合喷雾干燥法制备VA棕榈酸酯微囊。结果表明,最佳原料配比为:壁材浓度为0.1g/mL;芯材与壁材质量比为1∶4;壁材配比为m(明胶)∶m(聚天冬氨酸)=1∶1;乳化剂用量为1.5%;乙醇与水的体积比为1∶2。最佳微胶囊化工艺参数为:喷雾干燥进口温度为160℃,出口温度为70℃,乳化温度为38℃。经过7d的高温(60℃)加速氧化试验,微囊中VA棕榈酸酯的含量为初始含量的84.3%,较好地增加了VA棕榈酸酯的稳定性。

关 键 词:微胶囊  聚天冬氨酸  VA棕榈酸酯  喷雾干燥法
修稿时间:11 13 2006 12:00AM

Preparation and Properties of Vitamin A Palmitate Microcapsules
Du Jingling,Tan Tianwei.Preparation and Properties of Vitamin A Palmitate Microcapsules[J].Food and Fermentation Industries,2007,33(1):48-50.
Authors:Du Jingling  Tan Tianwei
Affiliation:Key Laboratory of Bioprocess of Beijing, Beijing University of Chemical Technology, Belling 100029 ,China
Abstract:To improve the stability of vitamin A palmitate,microcapsules for vitamin A palmitate were prepared by dry spray with polyaspartic acid and gelatin as wall material. The optimal parameter were found as following: the ratio of polyaspartic acid to gelatin 1∶1(W/W); the ratio of core material to wall material 1∶4;wall material concentration 10% (W/V),emulsifier concentration 1.5%; the ratio of absolute alcohol to water 1:2(V/V).For spray drying,the inlet air temperature 160℃, and outlet air temperature 70℃;The temperature of emulsification 38℃. More than 84.3%of vitamin A palmitate was obtained from seven day- accelerating experiment at 60℃.
Keywords:microcapsules  polyaspartic acid  vitamin A palmitate  spray drying
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号