Dimensional and geometrical tolerance balancing in concurrent design

In conventional design, tolerancing is divided into two separated sequential stages, i.e., product tolerancing and process tolerancing. In product tolerancing stage, the assembly functional tolerances are allocated to BP component tolerances. In the process tolerancing stage, the obtained BP tolerances are further allocated to the process tolerances in terms of the given process planning. As a result, tolerance design often results in conflict and redesign. An optimal design methodology for both dimensional and geometrical tolerances (DGTs) is presented and validated in a concurrent design environment. We directly allocate the required functional assembly DGTs to the pertinent process DGTs by using the given process planning of the related components. Geometrical tolerances are treated as the equivalent bilateral dimensional tolerances or the additional tolerance constraints according to their functional roles and engineering semantics in manufacturing. When the process sequences of the related components have been determined in the assembly structure design stage, we formulate the concurrent tolerance chains to express the relations between the assembly DGTs and the related component process DGTs by using the integrated tolerance charts. Concurrent tolerancing which simultaneously optimizes the process tolerance based on the constraints of concurrent DGTs and the process accuracy is implemented by a linear programming approach. In the optimization model the objective is to maximize the total weight process DGTs while weight factor is used to evaluate the different manufacturing costs between different means of manufacturing operations corresponding to the same tolerance value. Economical tolerance bounds of related operations are given as constraints. Finally, an example is included to demonstrate the proposed methodology.