| TIPS-1几何造型系统用于锻模CAD/CAM的评价和进展 |
| |
| 引用本文： | 陈国学,Y.Van Hoenaker.TIPS-1几何造型系统用于锻模CAD/CAM的评价和进展[J].机械工程学报,1989,25(2):16-21. |
| |
| 作者姓名： | 陈国学 Y.Van Hoenaker |
| |
| 作者单位： | 清华大学;加拿大舍布鲁克大学 |
| |
| 摘 要： | 分析了TIPS-1几何造型系统用于三维模锻件及其模具设计制造的可能性和问题，针对其中一些问题，对该系统做了改造和发展，包括：发展了一个零件层次运算系统，用于产生模具型槽；加强了该系统剖取截面的能力；发挥了一个新处理器用来处理截面数据，从而获得单个锻件或一组锻件的等效毛坯图。
|
| 关 键 词： | 锻造 计算机辅助设计 |
THE EVALUATION AND EVELOPMENT OF TIPS-1 GEOMETRIC MODELLING SYSTEM FOR CAD/CAM OF FORGING DIES |
| |
| Chen Guoxue Y.Van Hoenaker.THE EVALUATION AND EVELOPMENT OF TIPS-1 GEOMETRIC MODELLING SYSTEM FOR CAD/CAM OF FORGING DIES[J].Chinese Journal of Mechanical Engineering,1989,25(2):16-21. |
| |
| Authors: | Chen Guoxue YVan Hoenaker |
| |
| Affiliation: | Qinghua University Universiy of Sherbrooke |
| |
| Abstract: | The potential of TIPS-1version 77 for the designing and manufacturing of 3-D forgings and their dies are evaluated. Some improvements of TIPS-1 are introduced to correct the deficiencies which are noted, including the development of a part level operation system to produce die cavities, the enhancement of the capability to obtain sections, and the development of a new Processor to process the section data so that the equivalent bar diagram for a single forging or a group of forgings can be drawn. |
| |
| Keywords: | |
|
| 点击此处可从《机械工程学报》浏览原始摘要信息 |
|
点击此处可从《机械工程学报》下载全文 |
