| 某液压圆锥破碎机整机非线性有限元分析 |
| |
| 引用本文： | 张将,王雷刚,王富勇,杨柳松,吴佳佳.某液压圆锥破碎机整机非线性有限元分析[J].矿山机械,2019(7):35-40. |
| |
| 作者姓名： | 张将 王雷刚 王富勇 杨柳松 吴佳佳 |
| |
| 作者单位： | 洛阳矿山机械工程设计研究院有限责任公司;矿山重型装备国家重点实验室 |
| |
| 基金项目： | 国家重点研发计划(2017YFB1302100) |
| |
| 摘 要： | 基于接触非线性有限元分析方法,针对某液压圆锥破碎机整机结构进行有限元分析。通过仿真分析计算,得到整机结构各部件的变形和Mises应力分布,结果表明结构强度满足设计要求。在分析过程中,彻底解决了非线性接触对较多易造成计算不收敛的现象,有效地提高了计算精度,为今后液压圆锥破碎机的研发、结构优化计算提供了指导。
|
| 关 键 词： | 圆锥破碎机 接触非线性 变形 Mises应力 |
Nonlinear FEA on a hydraulic cone crusher |
| |
| ZHANG Jiang,WANG Leigang,WANG Fuyong,YANG Liusong,WU Jiajia.Nonlinear FEA on a hydraulic cone crusher[J].Mining & Processing Equipment,2019(7):35-40. |
| |
| Authors: | ZHANG Jiang WANG Leigang WANG Fuyong YANG Liusong WU Jiajia |
| |
| Affiliation: | (Luoyang Mining Machinery Engineering Design Institute Co., Ltd., Luoyang 471039, Henan, China;State Key Laboratory of Mining Heavy Equipment, Luoyang 471039, Henan, China) |
| |
| Abstract: | Based on the contact nonlinear finite element analysis method, the finite element analysis on the whole structure of a hydraulic cone crusher was conducted. After simulation and calculation, the deformation and Mises stress distribution of each component of the cone crusher were obtained, which showed the strength of the crusher met the design requirement. During the analysis process, the uneasy computation convergence due to many nonlinear contact pairs was completely avoided, thus the computation accuracy enhanced, which offered guidance for the development and structural optimization of the hydraulic cone crusher. |
| |
| Keywords: | cone crusher contact nonlinear deformation Mises stress |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
