| 采棉机摘锭座管传动系统动力学仿真分析 |
| |
| 引用本文： | 李小利,孙文磊,龚睫凯,付长兵,郭健.采棉机摘锭座管传动系统动力学仿真分析[J].机械设计与制造,2011(11). |
| |
| 作者姓名： | 李小利 孙文磊 龚睫凯 付长兵 郭健 |
| |
| 作者单位： | 新疆大学机械工程学院,乌鲁木齐,830047 |
| |
| 摘 要： | 针对采棉机摘锭座管传动系统啮合锥齿轮的失效形式,在UG三维建模软件中对摘锭进行三维建模以及虚拟装配完成了摘锭座管总成传动系统参数化模型,并对摘锭座管总成传动系统进行受力分析,利用UG三维建模软件和ADAMS动力学分析软件之间的转换接口,在ADAMS动力学分析软件中进行了啮合锥齿轮的动力学仿真分析,结合分析结果对该对锥齿轮在ANSYS有限元软件中进行应力分析,得出齿轮啮合的应力分布云图。希望得到的一些性能参数,为今后的研究提供一些帮助和参考。
|
| 关 键 词： | 摘锭 摘锭座管 动力学 |
Dynamic simulation analysis for driving system of spindle assembly |
| |
| LI Xiao-li,SUN Wen-lei,GONG Jie-kai,FU Chang-bing,GUO Jian.Dynamic simulation analysis for driving system of spindle assembly[J].Machinery Design & Manufacture,2011(11). |
| |
| Authors: | LI Xiao-li SUN Wen-lei GONG Jie-kai FU Chang-bing GUO Jian |
| |
| Affiliation: | LI Xiao-li,SUN Wen-lei,GONG Jie-kai,FU Chang-bing,GUO Jian(Xinjiang University,School of Mechanical Engineering,Urumqi 830047,China) |
| |
| Abstract: | Specific to the failure style of meshing bevel gear of drive system in the spindle assembly,3D modeling and virtual assembling for the spindle is done in the UG software,and parameterized model for driving system of the spindle assembly is finished,which force analysis is executed as well.With conversion interface between UG and ADAMS,dynamic simulation analysis for bevel gear is carried out in ADAMS,which result is applied to analyze the stress of the bevel gear in ANSYS software.Thus a cloud diagram showi... |
| |
| Keywords: | Spindle Spindle assembly Dynamics |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
