|
|||||
|
|
| MP3前盖注塑模具浇口的优化设计 | |
| 引用本文： | 史立峰,王立军. MP3前盖注塑模具浇口的优化设计[J]. 装备制造技术, 2012, 0(4): 157-158 |
| 作者姓名： | 史立峰 王立军 |
| 作者单位： | 辽宁装备制造职业技术学院塑性成型系,辽宁沈阳,110161 |
| 摘 要： | 介绍了Mold flow软件在MP3外壳注塑模具浇口位置设计中的应用,从产品的填充时间和熔接痕等方面,对不同的浇口设计方案进行了对比,最终确定了最佳的浇口位置。 |
| 关 键 词： | 注塑模具 浇口位置 Mold flow |
Optimization Design of Injection Mold Gate for MP3 Shell |
|
| SHI Li-feng , WANG Li-jun. Optimization Design of Injection Mold Gate for MP3 Shell[J]. , 2012, 0(4): 157-158 | |
| Authors: | SHI Li-feng WANG Li-jun |
| Affiliation: | (Department of Forming Technology,Liaoning Equipment Manufacture College of Vocational Technology, Shenyang 110161,China) |
| Abstract: | The gate position of injection mold for MP3 shell was analyzed by using Moldflow software.Comparative analysis was made between different positions of spure setting on fill time and weld lines,and the optimal gate position was determined at last. |
| Keywords: | injection mold gate position mold flow |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |