首页 | 本学科首页   官方微博 | 高级检索  
     

沉积条件对氢化锂薄膜形貌和沉积速率的影响
引用本文:雷洁红,段涛,闫正洲,邢丕峰.沉积条件对氢化锂薄膜形貌和沉积速率的影响[J].激光技术,2011,35(4):535-538.
作者姓名:雷洁红  段涛  闫正洲  邢丕峰
作者单位:1.西华师范大学 物理与电子信息学院, 南充 637002;
基金项目:国家八六三高技术研究发展计划资助项目,西华师范大学博士科研启动资金资助项目
摘    要:为了研究沉积条件对氢化锂薄膜沉积速率和表面形貌的影响,采用脉冲激光沉积方法在Si(100)基片上沉积了氢化锂薄膜.通过改变靶基距和氢压等手段来控制薄膜的沉积速率,得到了氢压与沉积速率和薄膜表面质量的关系.结果表明,随着氢压和靶基距的增加,氢化锂薄膜的沉积速率逐渐下降;适当增加氢压可以降低氢化锂薄膜的表面粗糙度.从薄膜生...

关 键 词:薄膜  沉积条件  沉积速率  表面形貌  脉冲激光沉积
收稿时间:2010-09-13

Effect of deposition condition on morphology and deposition velocity of LiH films
LEI Jie-hong,DUAN Tao,YAN Zheng-zhou,XING Pi feng.Effect of deposition condition on morphology and deposition velocity of LiH films[J].Laser Technology,2011,35(4):535-538.
Authors:LEI Jie-hong  DUAN Tao  YAN Zheng-zhou  XING Pi feng
Abstract:In order to study effect of deposition conditions on morphology and deposition velocity of LiH films,LiH films were prepared on Si(100) substrate by means of pulsed laser deposition.The deposition velocity of LiH films were controlled by changing the substrate-target distance and hydrogen pressure.The relations among hydrogen pressure,deposition velocity and surface quality of the films were obtained.The results showed that the deposition velocity of LiH films decreased with hydrogen pressure and substrate-target distance increasing,moreover,the surface roughness can be reduced by increasing the hydrogen pressure to a certain degree.The relation between surface roughness and hydrogen pressure was discussed based on the growth mechanism of films.The theoretical values are in good agreement with experimental values.
Keywords:
本文献已被 万方数据 等数据库收录!
点击此处可从《激光技术》浏览原始摘要信息
点击此处可从《激光技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号