|
|||||
|
|
| 激光重熔等离子喷涂WC颗粒增强镍基涂层组织及高温磨损性能 | |
| 引用本文： | 王东生,田宗军,王松林,沈理达,黄因慧.激光重熔等离子喷涂WC颗粒增强镍基涂层组织及高温磨损性能[J].焊接学报,2012,33(11):13-16. |
| 作者姓名： | 王东生 田宗军 王松林 沈理达 黄因慧 |
| 作者单位： | 1. 南京航空航天大学机电学院,南京210016 铜陵学院,铜陵244000 2. 南京航空航天大学机电学院,南京,210016 3. 铜陵学院,铜陵,244000 |
| 基金项目： | 国家自然科学基金资助项目，中国博士后科学基金资助项目，安徽省自然科学基金资助项目，安徽省高等学校省级优秀青年人才基金重点资助项目，江苏省博士后科研资助计划资助项目，安徽省高等学校省级自然科学研究资助项目 |
| 摘 要： | 为了提高等离子喷涂WC颗粒增强镍基涂层的性能，采用激光重熔工艺对涂层进行处理，研究了激光重熔对涂层微观组织和性能的影响．用扫描电镜（SEM）、X射线衍射仪（XRD）和显微硬度计分析了涂层表面形貌、微观结构、相组成和显微硬度，同时对涂层的高温摩擦磨损特性进行了考察．结果表明，激光重熔消除了等离子喷涂层的层片状结构、孔隙等缺陷，涂层致密度提高；另外在激光高能量密度作用下，WC颗粒部分熔化，并在周围析出枝晶结构．激光重熔处理后涂层的显微硬度明显提高，其磨损性能也显著高于原等离子喷涂层． |
| 关 键 词： | 激光重熔 等离子喷涂 镍基合金涂层 WC颗粒增强 |
| 收稿时间： | 2011/9/13 0:00:00 |
High temperature wear behavior of WC particles reinforced Ni-based plasma-sprayed coating by laser remelting |
|
| WANG Dongsheng,TIAN Zongjun,WANG Songlin,SHEN Lida and HUANG Yinhui.High temperature wear behavior of WC particles reinforced Ni-based plasma-sprayed coating by laser remelting[J].Transactions of The China Welding Institution,2012,33(11):13-16. | |
| Authors: | WANG Dongsheng TIAN Zongjun WANG Songlin SHEN Lida and HUANG Yinhui |
| Affiliation: | College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;Department of Mechanical Engineering, Tongling University, Tongling 244000, China,College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China,Department of Mechanical Engineering, Tongling University, Tongling 244000, China,College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China and College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China |
| Abstract: | To improve the properties of tungsten carbide(WC) particles reinforced Ni-based coating prepared by plasma spraying, laser remelting experiment was carried out and the effects of laser remelting on microstructure and properties on coating were studied.The surface morphology, microstructure, phase and microhardness of coatings were investigated by using scanning electron microscopy(SEM), X-ray diffractometry and microhardness measurement.Meanwhile, the high temperature fiction and wear behavior for both coatings were comparatively studied.The results showed that the defects of as-sprayed coating like lamellar stacking microstructure and pores were eliminated by laser remelting, and the remelted coating possessed a denser microstructure.In addition, WC particles partly dissociated at the edge, and the dendrite grew from the surface of the partially melted WC particles under high energy density laser.The laser-remelted sample had higher hardness, better wear resistance than the as-sprayed coating. |
| Keywords: | laser remelting plasma spraying Ni-based coating WC particles reinforced |
| 本文献已被 万方数据 等数据库收录！ | |
| 点击此处可从《焊接学报》浏览原始摘要信息 | |
| 点击此处可从《焊接学报》下载全文 | |