首页 | 本学科首页   官方微博 | 高级检索  
     

热处理对AZ91D镁合金腐蚀性能的影响
引用本文:马佰才,夏兰廷,杨娜.热处理对AZ91D镁合金腐蚀性能的影响[J].中国铸造装备与技术,2011(3).
作者姓名:马佰才  夏兰廷  杨娜
作者单位:太原科技大学材料科学与工程学院,太原,030024
摘    要:对经过不同热处理工艺处理后的AZ91D镁合金进行腐蚀试验,并测定其腐蚀参数.对腐蚀数据及金相显微组织分析、观察表明:时效处理后的AZ91D镁合金腐蚀率最低为2.128mm/a,为铸态和固溶加时效处理的AZ91D镁合金(3.081mm/a、3.209mm/a)的69.1%和66.3%;比仅进行固溶处理的AZ91D镁合金7.400mm/a的腐蚀率减少了71.2%,耐蚀性能提高2.48倍.合金组织中β相的形态和数量对合金腐蚀率起着重要作用.

关 键 词:热处理  AZ91D镁合金  β相

Effects of Heat Treatment on Corrosion Properties of AZ91D Magnesium Alloy
MA BaiCai,XIA LanTing,YANG Na.Effects of Heat Treatment on Corrosion Properties of AZ91D Magnesium Alloy[J].China Foundry Machinery & Technology,2011(3).
Authors:MA BaiCai  XIA LanTing  YANG Na
Affiliation:MA BaiCai,XIA LanTing,YANG Na(School of Materials and Engineering Taiyuan Science & Technology University,Taiyuan 030024,Shanxi China)
Abstract:Different heat treatments have been done on AZ91D Mg alloy which then has been tested on corrosion parameters.Corrosion date and metallograph observation showed after aging treatment the corrosion rate of AZ91D Mg was the lowest: 2.128mm/a which was respectively 69.1% of that(3.081mm/a) of the as-cast Mg alloy and 66.3% of that(3.209mm/a) of Mg alloy with solution plus aging treatment,and reduced by 71.2% compared with that(7.400mm/a) of the one after solution treatment,while the corrosion resistance of suc...
Keywords:
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号