| 机床爬行的仿真研究及控制措施 |
| |
| 引用本文： | 白国长,任天平. 机床爬行的仿真研究及控制措施[J]. 机床与液压, 2005, 0(4): 32-35 |
| |
| 作者姓名： | 白国长 任天平 |
| |
| 作者单位： | 郑州大学机械工程学院机电一体化研究所,郑州,450002 |
| |
| 摘 要： | 通过理论分析和数字仿真说明机床爬行的机理和原因，并针对各种原因全面介绍了国内外相应的防止方法和具体措施。
|
| 关 键 词： | 机床爬行 仿真分析 |
| 文章编号： | 1001-3881(2005)4-032-4 |
| 修稿时间： | 2004-02-09 |
The Simulation and Active Control Measure of Stick - slip Motion of Machine Tool |
| |
| BAI Guo-chang,REN Tian-ping. The Simulation and Active Control Measure of Stick - slip Motion of Machine Tool[J]. Machine Tool & Hydraulics, 2005, 0(4): 32-35 |
| |
| Authors: | BAI Guo-chang REN Tian-ping |
| |
| Abstract: | The mechanism and causes of the stick-slip motion were showed through theory analysis and mathematical simulation.Main anti methods and specific measure to all kinds of causes in recently were briefly introduced. |
| |
| Keywords: | Stick-slip motion Simulation analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
