| 粉末冶金法制取低铼钼合金的研究 |
| |
| 引用本文： | 刘沙.粉末冶金法制取低铼钼合金的研究[J].稀有金属与硬质合金,1997(4):26-29. |
| |
| 作者姓名： | 刘沙 |
| |
| 作者单位： | 长沙工业高等专科学校!长沙，410012 |
| |
| 摘 要： | 研究了用粉末冶金法制取Mo－3％Re合金的工艺．结果表明．粉末冶金法可以制得性能良好的Mo－3％Re合金．在混和料的制备中采用湿混或干湿混合．有利于Re的均匀分布；且3％Re的加入，可大大细化钼合金的晶粒．
|
| 关 键 词： | 粉末冶金 低铼钼合金 制取 |
Preparation of Low-Re Mo Alloy by P/M Process |
| |
| Liu Sha.Preparation of Low-Re Mo Alloy by P/M Process[J].Rare Metals and Cemented Carbides,1997(4):26-29. |
| |
| Authors: | Liu Sha |
| |
| Affiliation: | Changsha Technical College |
| |
| Abstract: | study is made on PM Process for Mo-3% Re alloy. It was discovered that Mo3% Re alloy could be obtained by PM. 3% Rhenium addition can greatly decrease the grain sizes of molybdenum alloys. It was clear that the rhenium particle distribution was fairly homogeneous by wet or dry-wet mixing methods. |
| |
| Keywords: | PM low-Re Mo alloy preparation |
| 本文献已被 CNKI 维普 等数据库收录！ |
