| 电弧喷涂工艺参数对JCW-B涂层性能的影响 |
| |
| 引用本文： | 吴 林,王 勇,董立先,邓化凌.电弧喷涂工艺参数对JCW-B涂层性能的影响[J].中国表面工程,2005,18(5):47-50. |
| |
| 作者姓名： | 吴 林 王 勇 董立先 邓化凌 |
| |
| 作者单位： | [1]中国石油大学机电工程学院,山东东营257061 [2]山东电力研究院,山东济南257032 |
| |
| 基金项目： | 山东电力集团公司资助项目（2004A-32） |
| |
| 摘 要： | 采用正交设计方法和通过极差分析研究了电弧喷涂工艺参数对JCW-B涂层结合强度和耐磨性的影响.结果表明,影响涂层性能的工艺参数主要是电弧电流,其次是喷涂距离和雾化空气压力.涂层结合强度值随电弧电流的增大而增加.涂层中的孔隙率是影响涂层结合强度的主要因素,氧化物含量是影响涂层耐磨损性能的主要因素,采用适中的电弧电流可减少涂层中的孔隙率和氧化物数量,有利于提高涂层的结合强度和耐磨性,获得具有良好综合性能的涂层.
|
| 关 键 词： | 电弧喷涂 JCW-B管状丝材 结合强度 耐磨性 |
| 文章编号： | 1007-9289（2005）05-0047-04 |
| 收稿时间： | 2005-09-06 |
| 修稿时间： | 2005-09-22 |
Influence of Arc Spraying Parameters on the Properties of JCW-B Coating |
| |
| WU Lin,WANG Yong,DONG Li-xian,DENG Hua-ling.Influence of Arc Spraying Parameters on the Properties of JCW-B Coating[J].China Surface Engineering,2005,18(5):47-50. |
| |
| Authors: | WU Lin WANG Yong DONG Li-xian DENG Hua-ling |
| |
| Abstract: | The influence of arc spraying parameters on the adhesive strength and wear-resistance of JCW-B coating was studied by orthogonal design test and extreme analysis. The results showed that the main parameters influencing the coating properties are the arc current, spraying distance and air pressure. The adhesive strength increased along with the arc current. The porosity in the coating was the main reason influencing the adhesive strength of coating. The oxide was the main reason influencing its wear-resistance. Selecting a moderate arc current can decrease the porosity and oxide, and increase the adhesive strength and wear-resistance of the coating. |
| |
| Keywords: | arc spraying JCW-B flux cored wire adhesive strength wear-resistance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《中国表面工程》浏览原始摘要信息 |
|
点击此处可从《中国表面工程》下载全文 |
