| 侧抽芯机构的斜导柱有限元分析 |
| |
| 引用本文： | 胡光明,甘屹,杨进峰.侧抽芯机构的斜导柱有限元分析[J].模具工业,2014(9):40-43. |
| |
| 作者姓名： | 胡光明 甘屹 杨进峰 |
| |
| 作者单位： | 1. 广东工程职业技术学院 机电工程学院,广东 广州,510520
2. 上海理工大学 机械工程学院,上海,200093 |
| |
| 摘 要： | 通过改变斜导柱倾斜角α及厚度d,运用Pro/Mechanica软件对斜导柱进行有限元分析,得出影响斜导柱受力状况及使用寿命系数的规律,对斜导柱参数的选择给出指导意见,为注射模的设计提供一定参考。
|
| 关 键 词： | 注射模 Pro/Mechanica 斜导柱 倾斜角 |
Finite element analysis of angle pins in side core-pulling mechanism |
| |
| HU Guang-ming,GAN Yi,YANG Jin-feng.Finite element analysis of angle pins in side core-pulling mechanism[J].Die & Mould Industry,2014(9):40-43. |
| |
| Authors: | HU Guang-ming GAN Yi YANG Jin-feng |
| |
| Affiliation: | HU Guang-ming, GAN Yi, YANG Jin-feng (1.College of Mechanical and Electrical Engineering, Guangdong Engineering Polytechnic, Guangzhou, Guangdong 510520, China; 2.College of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China) |
| |
| Abstract: | The finite element analysis was made on angle pins with different slant angleαand thickness by applying the Pro/Mechanica software. The rules affecting the stress state and service life coefficient of angle pins were obtained. |
| |
| Keywords: | injection mould Pro/Mechanica angle pin slant angle |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
