| 基于AutoCAD的数控加工自动编程系统的开发 |
| |
| 引用本文： | 余世林,朱国宝,陈亚东.基于AutoCAD的数控加工自动编程系统的开发[J].机床与液压,2006(3):214-215,224. |
| |
| 作者姓名： | 余世林 朱国宝 陈亚东 |
| |
| 作者单位： | 1. 镇江船艇学院,镇江,12003
2. 武汉理工大学,武汉,430063 |
| |
| 摘 要： | 利用AutoCAD强大的绘图功能绘制加工零件图，通过接口程序提取DXF文件数据信息，然后根据数控加工工艺要求，对DXF文件数据进行处理，自动生成符合数控加工系统代码格式的数控程序。并且介绍了WTUAPT的系统结构和功能。
|
| 关 键 词： | 数控加工 自动编程 DXF文件 |
| 文章编号： | 1001-3881（2006）3-214-2 |
| 收稿时间： | 2004-12-23 |
| 修稿时间： | 2004-12-23 |
The Development of NC APT Based on AutoCAD |
| |
| YU Shilin,ZHU Guobao,CHEN Yadong.The Development of NC APT Based on AutoCAD[J].Machine Tool & Hydraulics,2006(3):214-215,224. |
| |
| Authors: | YU Shilin ZHU Guobao CHEN Yadong |
| |
| Affiliation: | 1. Zhenjiang Watercraft College, Zhenjiang Jiangshu 212003, China; 2. Wuhan University of Technology, Wuhan 430063, China |
| |
| Abstract: | On the basis of using AutoCAD as the drawing software to draw parts drawing, a NC APT was developed by getting the drawing information from DXF file. According to the needs of final programming, NC codes were obtained automatically by analyzing and advancing these DXF drawing data. Finally, the structures and functions of WTUAPT were introduced. |
| |
| Keywords: | AutoCAD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
