首页 | 本学科首页   官方微博 | 高级检索  
     

粒径分布对流化裂化催化剂性能的影响
引用本文:刘引定,谭争国,滕秋霞.粒径分布对流化裂化催化剂性能的影响[J].中国粉体技术,2008,14(6).
作者姓名:刘引定  谭争国  滕秋霞
作者单位:中国石油石化研究院兰州化工研究中心,甘肃,兰州,730060
摘    要:研究了颗粒粒径控制技术对流化裂化催化剂性能的影响,实验表明,在流化裂化催化剂制备过程中,原料颗粒平均粒径小于3μm时,可以有效降低催化剂的磨损指数,增加基质组分与活性组分的分散均匀度,提高了分子筛的活性稳定性;优化流化裂化催化剂粒度分布,增强了催化剂的重油转化能力,提高了高价值目的产品的收率。

关 键 词:流化裂化催化剂  颗粒粒径  磨损指数

Effects of Particle Size on Properties of Fluidized Catalyst
Liu yinding,Tan Zhengguo,Teng Qiuxia.Effects of Particle Size on Properties of Fluidized Catalyst[J].China Powder Science and Technology,2008,14(6).
Authors:Liu yinding  Tan Zhengguo  Teng Qiuxia
Affiliation:Liu yinding,Tan Zhengguo,Teng Qiuxia (Lanzhou Petrochemical Company Research Institute,Lanzhou 730060,China)
Abstract:The impacts of particle size on the performance of fluidized catalyst were studied. The experiments results indicated that during the preparation of fluidized catalyst, when the average particle size of the raw materials was lower than 3 μm, the attrition loss of fluidized catalyst could be reduced greatly and dispersity of matrix and active components would be increased greatly. Therefore the zeolite stability was improved considerably. The fluidized catalyst with optimized particle size shown higher heavy oil conversion rate and desirable products yields can be improved greatly.
Keywords:fluid catalytic cracking  particle size  attrition loss  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号