| 汽车塑料配件注塑模具设计 |
| |
| 引用本文： | 叶长青.汽车塑料配件注塑模具设计[J].模具技术,2007(4):11-15. |
| |
| 作者姓名： | 叶长青 |
| |
| 作者单位： | 湖南科技职业学院,机电系,湖南,长沙,410118 |
| |
| 摘 要： | 通过分析两制件的使用要求和结构特点,介绍了一模成型两个不同制件的模具结构特点及模具的动作原理,研究和分析了模具结构采用斜导柱侧抽芯和斜顶相结合,进行内、外侧抽芯成型方案的合理性,给出了模具设计的详细计算过程,实现了一模成型两个不同制件的设想,得出了此模具既方便加工又节约了材料的结论.
|
| 关 键 词： | 抽芯机构 滑块 定模 动模 汽车塑料配件 注塑模具设计 plastic auto mould design 材料 节约 加工 计算过程 合理性 方案 抽芯成型 结合 斜顶 侧抽芯 斜导柱 模具结构 研究 原理 结构特点 |
| 文章编号： | 1000-4934（2007）04-0000-05 |
| 收稿时间： | 2007-03-05 |
| 修稿时间： | 2007年3月5日 |
Injection mould design for auto plastic part |
| |
| YE Chang-qing.Injection mould design for auto plastic part[J].Die and Mould Technology,2007(4):11-15. |
| |
| Authors: | YE Chang-qing |
| |
| Affiliation: | YE Chang-qing |
| |
| Abstract: | Based on the analysis of the application requirement and the structural features of two plastic parts, mould structure feature and die movement theory was introduced for mould with two different parts forming at one time. Feasibility of angle-pin moving sidecore slide with angled-lift for inner outer side-core slides was studied and analyzed. The design process of mold was presented in detail. Idea of manufacturing two different parts in one mould was achieved. It is concluded that the mould is easy to manufacture and save material. |
| |
| Keywords: | side-core pulling mechanism slide fixed die moving die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
