| 低速光纤碳涂覆工艺的研究 |
| |
| 引用本文： | 赵金岐,崔立夫.低速光纤碳涂覆工艺的研究[J].光纤与电缆及其应用技术,2010(3):19-21,26. |
| |
| 作者姓名： | 赵金岐 崔立夫 |
| |
| 作者单位： | 中国电子科技集团公司第四十六研究所,天津300220 |
| |
| 摘 要： | 由于整个光纤碳涂覆系统中采用了早期的低速拉丝塔,限制了整个光纤碳涂覆系统的生产速度,这使得光纤碳涂覆工艺必须要围绕低速进行设计和调整。通过改变碳氢化合物气体的成分及浓度,改善了低速光纤碳涂覆工艺,使得在低速拉丝条件下获得大长度碳涂覆光纤成为可能。
|
| 关 键 词： | 静态疲劳 密封被覆 静态疲劳因子 |
Low Speed Carbon Coating Technology for Optical Fibers |
| |
| ZHAO Jin-qi,CUI Li-fu.Low Speed Carbon Coating Technology for Optical Fibers[J].Optical Fiber & Electric Cable and Their Applications,2010(3):19-21,26. |
| |
| Authors: | ZHAO Jin-qi CUI Li-fu |
| |
| Affiliation: | (The 46th Research Institute,CETC,Tianjin 300220,China) |
| |
| Abstract: | The efforts to improve the low-speed carbon coating process by changing the composition and concentration of hydrocarbon precursor gases are presented.Also,the coating reactor structure is improved.In this case,it is possible to attain long length carbon coating optical fibers when drawing at lowspeed. |
| |
| Keywords: | static fatigue hermetically coated static fatigue factor |
| 本文献已被 维普 等数据库收录！ |
|
