| 切削数据库中用Matlab与VC混合编程实现数据可视化 |
| |
| 引用本文： | 史向荣,张京英,于启勋,王士兵.切削数据库中用Matlab与VC混合编程实现数据可视化[J].工程图学学报,2004,25(3):120-123. |
| |
| 作者姓名： | 史向荣 张京英 于启勋 王士兵 |
| |
| 作者单位： | 1. 北京理工大学,北京,100081
2. 山东华兴建筑设计院,济南,250014 |
| |
| 摘 要： | 切削数据库中数据的可视化处理是一重要研究方向。采用试验数据,对切削数据库中刀具磨损等曲线用Matlab数值计算及图形处理软件与Visual C 混合编程进行可视化图形处理,得到能够脱离Matlab环境运行的曲线图形模块的方法。使用这种方法,可以大大缩短软件的开发周期。此方法在图像处理等需要大量计算的工程应用场合有广泛的应用价值。
|
| 关 键 词： | 计算机应用 切削数据库 VC编程 Matlab可视化 磨损曲线 |
| 文章编号： | 1003-0158(2004)03-0120-04 |
| 修稿时间： | 2004年4月28日 |
A Method of Running Visually Graphics Database in Cutting Database by Using Matlab and Visual C++ |
| |
| SHI Xiang-rong,ZHANG Jing-ying,YU Qi-xun,WANG Shi-bing.A Method of Running Visually Graphics Database in Cutting Database by Using Matlab and Visual C++[J].Journal of Engineering Graphics,2004,25(3):120-123. |
| |
| Authors: | SHI Xiang-rong ZHANG Jing-ying YU Qi-xun WANG Shi-bing |
| |
| Affiliation: | SHI Xiang-rong1,ZHANG Jing-ying1,YU Qi-xun1,WANG Shi-bing2 |
| |
| Abstract: | Something was discussed in this paper. The process of data visualization is an important aspect in cutting database. Using Matlab and Visual C to process wearing curves in cutting database, we can get a method of running visually graphics database without the environment of Matlab. By this method, we can greatly shorten the cycle of software development. Thus, it will be widely used in many projects which need a lot of calculations, such as graphics processing. |
| |
| Keywords: | computer application cutting tool database VC program Matlab visualization wearing curves |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
