|
|||||
|
|
| 面向装配序列规划的装配建模方法研究 | |
| 引用本文： | 周晓明,杜平安. 面向装配序列规划的装配建模方法研究[J]. 计算机集成制造系统, 2007, 13(12): 2365-2372,2387 |
| 作者姓名： | 周晓明 杜平安 |
| 作者单位： | 电子科技大学,机械电子工程学院,四川,成都,610054;电子科技大学,机械电子工程学院,四川,成都,610054 |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| 摘 要： | 为实现自动化的装配序列规划,提出了一种应用面向对象和Petri网技术定义的产品装配模型.该模型由静态模型和动态模型构成.基于模型定义,提出了局部装配可行性的判定依据,并据此建立了一种基于静态模型的动态模型构造算法.该算法通过逐层分析可能状态的变迁,最终获得装配体所有几何可行的装配序列.通过实例验证了该建模方法的有效性. |
| 关 键 词： | 装配建模 装配序列规划 面向对象 Petri网 |
| 文章编号： | 1006-5911（2007）12-2365-08 |
| 收稿时间： | 2006-12-14 |
| 修稿时间： | 2007-06-11 |
Assembly modeling for assembly sequence planning |
|
| ZHOU Xiao-ming,DU Ping-an. Assembly modeling for assembly sequence planning[J]. Computer Integrated Manufacturing Systems, 2007, 13(12): 2365-2372,2387 | |
| Authors: | ZHOU Xiao-ming DU Ping-an |
| Abstract: | To realize automatic process Assembly Sequence Planning(ASP),a Product Assembly Model(PAM) was proposed which was oriented to Object-Oriented and Petri net technologies.PAM was composed of static model and dynamic model.Some criteria for estimating local assembly feasibility based on model definition were also presented,and according to these criteria,an algorithm to construct dynamic model based on static model was put forward.In this algorithm,all feasible status and transitions were analyzed layer by layer,and finally all geometrically feasible assembly sequences could be obtained.Finally,an assembly case was used to illustrate the principles and the validity of the algorithm. |
| Keywords: | assembly modeling assembly sequence planning object-oriented technology Petri net |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |