| 耐高负压聚四氟乙烯衬里设备、管道制作工艺 |
| |
| 引用本文： | 陈国龙,蔡勇,李国林.耐高负压聚四氟乙烯衬里设备、管道制作工艺[J].有机氟工业,2004(4):47-49. |
| |
| 作者姓名： | 陈国龙 蔡勇 李国林 |
| |
| 作者单位： | 温州赵氟隆有限公司
(陈国龙，蔡勇)，温州赵氟隆有限公司(李国林) |
| |
| 摘 要： | 聚四氟乙烯衬里设备、管道，经常会因为内部负压产生内瘪，以至拉裂损坏。本文讲述了一种特殊制造工艺：将聚四氟乙烯衬里外表面处理后，采用特殊粘接剂，将其与钢外壳粘接起来，以防止负压，延长产品使用寿命。
|
| 关 键 词： | 聚四氟乙烯 衬里 负压 粘接剂 管道 裂损 外壳 处理 延长 防止 |
Manufacturing Method of PTFE Lined Negative Pressure Resisted Steel Equipments |
| |
| Chen Guolong Cai Yong Li Guolin.Manufacturing Method of PTFE Lined Negative Pressure Resisted Steel Equipments[J].Organo-Fluorine Industry,2004(4):47-49. |
| |
| Authors: | Chen Guolong Cai Yong Li Guolin |
| |
| Abstract: | PTFE lined equipments often be damaged by vacuum occured inside the equipments, pipes,etc. In this article, a new manufacturing method is reported: after special treatment on the surface of the PTFE liner, use special adhesive to make the surface stuck with the PTFE liner firmly, therefore the equipment can resist vacuum and extend working life. |
| |
| Keywords: | PTFE Resist negative pressure Stuck with |
| 本文献已被 CNKI 维普 等数据库收录！ |
