首页 | 本学科首页   官方微博 | 高级检索  
     

两步沉积法制备Ni/Al2O3复合镀层及其耐磨性能研究
引用本文:田海燕,朱荻.两步沉积法制备Ni/Al2O3复合镀层及其耐磨性能研究[J].兵器材料科学与工程,2007,30(4):41-44.
作者姓名:田海燕  朱荻
作者单位:南京航空航天大学,机电学院,江苏,南京,210016;南京航空航天大学,机电学院,江苏,南京,210016
基金项目:江苏省自然科学基金,高等学校博士学科点专项科研项目
摘    要:采用两步电化学沉积技术在铜基体上制备Ni/Al2O3复合镀层。用电泳沉积工艺在铜基体上均匀沉积Al2O3涂层,用电镀技术在Al2O3涂层中嵌入金属镍,得到具有高Al2O3含量的Ni/Al2O3复合镀层。试验结果表明,两步沉积法能够提高复合镀层中的Al2O3微粒含量,镀层显微硬度及耐磨性能均有提高。

关 键 词:复合镀层  电泳沉积  电镀  显微硬度  耐磨性
文章编号:1004-244X(2007)04-0041-04
修稿时间:2006-10-23

Ni/Al2O3 composite coatings prepared by two steps deposition method and its anti-wear performance
TIAN Hai-yan,ZHU Di.Ni/Al2O3 composite coatings prepared by two steps deposition method and its anti-wear performance[J].Ordnance Material Science and Engineering,2007,30(4):41-44.
Authors:TIAN Hai-yan  ZHU Di
Affiliation:Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China
Abstract:A novel technique, the two-step deposition method, was proposed to produce Ni/Al2O3 composite coating. A uniform film of Al2O3 particles was first electrophoretically deposited on a copper substrate. Nickel was then electrodeposited onto the substrate covered with the film of these ceramic particles. High volumetric content of Al2O3 particles was incorporated into nickel matrix by this method. Experiments indicate that microhardness and wear resistance of the composite coating prepared by the two-step deposition method are higher than that of traditional composite coatings.
Keywords:composite coating  electrophoretic deposition  electroplating  microhardness  wear resistance
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号