| 一般6R机器人的位置反解与运动仿真 |
| |
| 引用本文： | 于艳秋,王品,廖启征.一般6R机器人的位置反解与运动仿真[J].中国机械工程,2003,14(24):2130-2133. |
| |
| 作者姓名： | 于艳秋 王品 廖启征 |
| |
| 作者单位： | 北京邮电大学 |
| |
| 基金项目： | 国家重点基础研究发展规划资助项目(G1998030600)，国家自然科学基金资助项目(59975010) |
| |
| 摘 要： | 在建立D—H矩阵空间位移封闭方程的基础上，结合理论分析找出10个运动学方程，通过结式消元得到没有增根也无漏根的一元十六次方程。反解结果在机器人的运动仿真中加以验证，为进一步应用创造了条件。仿真过程采用OpenGL进行三维实体造型，通过文件传输及数据交互实时显示机器人的运动情况，使使用者直观了解机器人在整个运动过程中的位姿，为进一步进行轨迹规划和误差补偿的研究与验证等问题提供了良好的平台。程序中采用尺寸链驱动，使机器人的结构尺寸可变，从而使其应用范围进一步扩大，尤其适用于模块化机器人。
|
| 关 键 词： | 机器人 位置反解 运动学方程 运动仿真 |
| 文章编号： | 1004-132X(2003)24-2130-04 |
Inverse Kinematic Analysis of General 6R Serial Robot and Motion Simulation |
| |
| Yu Yanqiu,Wang Pin,Liao Qizheng Beijing University of Posts and Telecommunications,Beijing,China.Inverse Kinematic Analysis of General 6R Serial Robot and Motion Simulation[J].China Mechanical Engineering,2003,14(24):2130-2133. |
| |
| Authors: | Yu Yanqiu Wang Pin Liao Qizheng Beijing University of Posts and Telecommunications Beijing China |
| |
| Abstract: | In this paper, 10 kinematic equations areobtained to solve the inverse kinematic problem of a gen-eral 6R serial robot. It is shown that these equations canbe reduced to a 16--order polynomial equation in one un-known. The results were verified by motion simulationand can be used for further applications. OpenGL wasapplied to make the solid model in the simulation and themotions were displayed based on files transfer and dataexchanges between programs. Thus the users can ob-serve positions and orientations of the robot clearly, andthe program can be used in other robot problems such aspass planning, calibrations and so on. Dimensions of therobot can be changed easily, so its applications are rela-tively spread. |
| |
| Keywords: | robot inverse kinematic analysis kinematic equation motion simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
