|
|||||
|
|
| 200kA预焙铝电解槽强化电流的生产实践 | |
| 引用本文： | 戴小平. 200kA预焙铝电解槽强化电流的生产实践[J]. 有色冶炼, 2006, 35(5): 11-12,45 |
| 作者姓名： | 戴小平 |
| 作者单位： | 中国铝业青海分公司,青海大通810108 |
| 摘 要： | 介绍了青海铝200kA预焙槽强化电流的生产实践。在不改变电解槽结构和外部环境的情况下，电流强化5％，可以提高产能9％。强化电流对电流效率影响不大，节电效果显著。 |
| 关 键 词： | 200 kA铝电解槽 强化电流 技术条件 电流效率 |
| 文章编号： | 1672-6103（2006）10-0011-02 |
| 收稿时间： | 2005-11-25 |
| 修稿时间： | 2005-11-25 |
Production practice of 200kA pre-baked aluminum smelting cell with intensified electric current |
|
| DAI Xiao-ping. Production practice of 200kA pre-baked aluminum smelting cell with intensified electric current[J]. China Nonferrous Metallurgy, 2006, 35(5): 11-12,45 | |
| Authors: | DAI Xiao-ping |
| Abstract: | This paper describes the production practice of 200 kA pre-baked cell with intensfiled current in Qinghai Aluminum Plant. It is possible to raise production capacity by 9% in case the current is intensified by 5% without change of cell structure and external conditions, and the intensified current would cause almost no influence on the current efficiency and will yield notable results in power saving. |
| Keywords: | 200 kA aluminum cell intensified current technical conditions current efficiency |
| 本文献已被 维普 等数据库收录！ | |