| Abstract: | Plastic boss and screw fasteners are an economical means of securing automotive components, such as instrument or body panels. However, new materials and/or suboptimal design present challenges to the boss/screw effectiveness. Failure of a boss/screw can result is loss of functional performance or increased squeak and rattle. Failure is often controlled by what occurs during the initial thread‐forming process. Thus, the goal of this paper is to develop an FEA model to elucidate the thread‐forming process so that we can facilitate subsequent design and/or process optimization, and understand potential failure modes. The FEA must accommodate nonlinear couplings, such as large strain and heat transfer. Heat generation is present in the forms of interfacial shear heating and plastic work associated with the large deformation of the interface between the boss and screw. Strain rate‐dependent materials are included using the Eyring theory for plastic flow of polymeric materials. Results of the model are presented and compared to experimentally determined torque curves and temperatures. Polym. Eng. Sci. 44:1498–1508, 2004. © 2004 Society of Plastics Engineers. |
