| 炼油化工厂皂化废水处理工程的技术改造 |
| |
| 引用本文： | 邵芳,李法庆,李方义. 炼油化工厂皂化废水处理工程的技术改造[J]. 中国给水排水, 2006, 22(24): 38-40 |
| |
| 作者姓名： | 邵芳 李法庆 李方义 |
| |
| 作者单位： | 1. 滨州职业学院,工业工程系,山东,滨州,256624
2. 山东大学,机械工程学院,山东,济南,250061 |
| |
| 摘 要： | 分析了某炼油化工废水处理厂原处理工艺存在的问题，提出了利用炼油化工废水作为稀释水综合处理环氧丙烷皂化废水的改造方案。运行实践表明，当进水COD为1800～2200ms／L时，出水COD为160～300mg／L，达到了《污水综合排放标准》（GB 8978-1996）的二级标准。最后对改造经验进行了总结。
|
| 关 键 词： | 炼油化工废水 皂化废水 稀释 工艺改造 |
| 文章编号： | 1000-4602（2006）24-0038-03 |
| 收稿时间： | 2006-09-07 |
| 修稿时间： | 2006-09-07 |
Technology Modification of Treatment Engineering of Saponification Wastewater |
| |
| SHAO Fang,LI Fa-qing,LI Fang-yi. Technology Modification of Treatment Engineering of Saponification Wastewater[J]. China Water & Wastewater, 2006, 22(24): 38-40 |
| |
| Authors: | SHAO Fang LI Fa-qing LI Fang-yi |
| |
| Affiliation: | 1. Department of Industry Engineering, Binzhou Vocational College, Binzhou 256624, China; 2. School of Mechanical Engineering, Shandong University, Jinan 250061, China |
| |
| Abstract: | By making analysis on the problems existing in original treatment process of a chemical industry wastewater treatment plant,the modification scheme for comprehensive treatment of propylene oxide(PO) saponification wastewater by using oil refinery and petrochemical wastewater as dilution water was presented.The running result shows that when the influent COD is 1 800-2 200 mg/L,the effluent COD will be 160-300 mg/L,reaching II-class criteria specified in Integrated Wastewater Discharge Standard(GB 8978-1996).Finally,the modification experiences were summarized. |
| |
| Keywords: | oil refinery and petrochemical wastewater saponification wastewater dilution technology modification |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
