| 内球面与向心柱面相贯圆角的数控加工研究 |
| |
| 引用本文： | 周铁玲,冯帅男.内球面与向心柱面相贯圆角的数控加工研究[J].一重技术,2011(3):39-41. |
| |
| 作者姓名： | 周铁玲 冯帅男 |
| |
| 作者单位： | 1. 天津重型装备工程研究有限公司冷工艺研究部助理工程师,天津,300457
2. 天津重型装备工程研究有限公司冷工艺研究部高级工程师,天津,300457 |
| |
| 摘 要： | 针对内球面与向心柱面相贯圆角这一空间曲面,深入研究数控铣削加工该圆角的刀具选择和编程轨迹规划。
|
| 关 键 词： | 三面刃铣刀 编程轨迹规划 角度变量方式 对刀点 刀位点 |
How To Process curvature between Inner Spherical Surface and Centripetal Cylindrical Surface with Numerical Control Machine |
| |
| Zhou Tieling,Feng Shuainan.How To Process curvature between Inner Spherical Surface and Centripetal Cylindrical Surface with Numerical Control Machine[J].CFHI Technology,2011(3):39-41. |
| |
| Authors: | Zhou Tieling Feng Shuainan |
| |
| Affiliation: | Zhou Tieling,Feng Shuainan |
| |
| Abstract: | This article discusses the cutter selection and programed trace planning for the processing of the curvature between an inner spherical surface and centripetal cylindrical surface by using NC milling and boring machine. |
| |
| Keywords: | face and side milling cutter programed trace planning angle variable cutter calibration point cutter location point |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
