| KTC80型切丝机国产导丝条的改造 |
| |
| 引用本文： | 李民,苏敏,朱骄崖,吴涛,李泽惠,刘新宇. KTC80型切丝机国产导丝条的改造[J]. 烟草科技, 2011, 0(6): 26-28,38 |
| |
| 作者姓名： | 李民 苏敏 朱骄崖 吴涛 李泽惠 刘新宇 |
| |
| 作者单位： | 红云红河烟草(集团)有限责任公司昆明卷烟厂,昆明市五华区红锦路,650091 |
| |
| 摘 要： | KTC80型切丝机导丝条配件国产化后,国产导丝条在生产过程中出现排丝不畅、烟丝粘连等问题,为减少切丝过程中的夹刀现象,通过分析国产和进口导丝条的结构差异,发现抛料槽圆角半径不一致是导致国产导丝条排丝不畅的主要原因.为此,对国产导丝条进行了局部改进,导丝条抛料槽圆角半径由1.75 mm增大到2 mm,导丝条高度由28 m...
|
| 关 键 词： | KTC80型切丝机 导丝条 夹刀现象 抛料槽 圆角半径 |
Improvement of Domestic Tobacco Guide Strip in KTC80 Tobacco Cutter |
| |
| LI MIN,SU MIN,ZHU JIAO-YA,WU TAO,LI ZE-HUI,LIU XIN-YU. Improvement of Domestic Tobacco Guide Strip in KTC80 Tobacco Cutter[J]. Tobacco Science & Technology, 2011, 0(6): 26-28,38 |
| |
| Authors: | LI MIN SU MIN ZHU JIAO-YA WU TAO LI ZE-HUI LIU XIN-YU |
| |
| Affiliation: | LI MIN,SU MIN,ZHU JIAO-YA,WU TAO,LI ZE-HUI,and LIU XIN-YU Kunming Cigarette Factory,Hongyun Honghe Tobacco(Group) Co.,Ltd.,Kunming 650091,China |
| |
| Abstract: | In KTC80 tobacco cutter with domestic tobacco guide strips,the output cut tobacco tends to stick together and not flow smoothly,in worst conditions even clamp the knife blade.By analyzing the structural difference between imported and domestic tobacco guide strips,it was found that the different inside radius of cut tobacco chute was the main reason causing the problems.Therefore,the radius was enlarged from 1.75 to 2 mm and the height of tobacco guide strip increased from 28 to 28.3 mm.Comparing with impor... |
| |
| Keywords: | KTC80 tobacco cutter Tobacco guide strip Knife clamping Cut tobacco chute Inside radius |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
