| AZ31D镁合金电动螺丝刀刀把等温挤压成形试验研究 |
| |
| 引用本文： | 王昶,胡亚民. AZ31D镁合金电动螺丝刀刀把等温挤压成形试验研究[J]. 精密成形工程, 2011, 3(3): 51-55 |
| |
| 作者姓名： | 王昶 胡亚民 |
| |
| 作者单位： | 重庆理工大学汽车学院,重庆,400050 |
| |
| 基金项目： | 重庆市自然科学基金(CSTC2006BB4398) |
| |
| 摘 要： | 针对电动螺丝刀刀把零件,设计了等温挤压成形工艺和等温挤压试验模具.采用YAW-500 kN微机控制电液伺服压力试验机进行挤压试验,试验证明所设计的成形方案合理可行,同时也验证了所设计的试验模具的可行性.
|
| 关 键 词： | 电动螺丝刀刀把 等温挤压 镁合金AZ3ID |
| 收稿时间： | 2010-12-29 |
| 修稿时间： | 2011-05-10 |
Isothermal Extrusion Study of AZ31D Magnesium Alloy for Hilt of Electric Screwdriver |
| |
| WANG Chang and HU Ya-min. Isothermal Extrusion Study of AZ31D Magnesium Alloy for Hilt of Electric Screwdriver[J]. Journal of Netshape Forming Engineering, 2011, 3(3): 51-55 |
| |
| Authors: | WANG Chang and HU Ya-min |
| |
| Affiliation: | WANG Chang,HU Ya-min(Automobile Engineering Faculty,Chongqing University of Technology,Chongqing 400050,China) |
| |
| Abstract: | The techniques of isothermal extrusion and mould were designed for the part of hilt of electric screwdriver.The isothermal extrusion was processed by the pressure machine-YAW-500kN.The scheme of deformation and the mould of isothermal extrusion were verified reasonable by the process experiment. |
| |
| Keywords: | hilt of electric screwdriver isothermal extrusion AZ31D magnesium alloy |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载免费的PDF全文 |
