|
|||||
|
|
| 复合材料整体化结构胶合面的出平面应力问题 | |
| 引用本文： | 袁国青,陈振兴,薛元德,黎观生,杨家勇,邱学仕,郭家平. 复合材料整体化结构胶合面的出平面应力问题[J]. 材料工程, 2009, 0(Z2) |
| 作者姓名： | 袁国青 陈振兴 薛元德 黎观生 杨家勇 邱学仕 郭家平 |
| 作者单位： | 同济大学航空航天与力学学院;成都飞机设计研究所; |
| 摘 要： | 复合材料共固化/共胶接/二次胶接(co-cured/co-bonded/secondary bonding)整体成型技术是最基本、最常用的复合材料整体化成型技术。在整体化结构受载承力后,若在胶合面处局部出现显著的出平面正拉应力,则极易发生局部的胶层脱粘破坏,这种由设计载荷引起的脱层损伤将对结构安全构成显著威胁。由于此类胶合面为非典型胶接面,容易为人忽视。本文就有关概念、致出平面应力的主要因素及其对出平面应力的影响规律进行了研究,表明:局部刚度突变、局部施压是致出平面应力的主要因素,胶膜性能参数、几何参数等对出平面应力的大小也有显著影响。 |
| 关 键 词： | 复合材料 整体化结构 胶合面 出平面应力 |
Issues About Out-plane Tensile Stress of Adhesive Regions of Composite Integrated Structure |
|
| YUAN Guo-qing,CHEN Zhen-xing,XUE Yuan-de,LI Guan-sheng,YANG Jia-yong,QIU Xue-shi,GUO Jia-ping. Issues About Out-plane Tensile Stress of Adhesive Regions of Composite Integrated Structure[J]. Journal of Materials Engineering, 2009, 0(Z2) | |
| Authors: | YUAN Guo-qing CHEN Zhen-xing XUE Yuan-de LI Guan-sheng YANG Jia-yong QIU Xue-shi GUO Jia-ping |
| Affiliation: | YUAN Guo-qing1,CHEN Zhen-xing1,XUE Yuan-de1,LI Guan-sheng2,YANG Jia-yong2,QIU Xue-shi2,GUO Jia-ping2(1 School of Aerospace Engineering , Applied Mechanics,Tongji University,Shanghai 200092,China,2 Chengdu Aircraft Design & Research Institute,Chengdu 610041,China) |
| Abstract: | Co-cured/co-bonded /secondary bonding is the most basic and common used integrated manufacturing technique of composites structure.When the loading applied in the integrated structure and then the significant positive tensile stress appeared in local adhesive regions,local debonding /delamination will be easily induced.The debonding/delamination damage caused by design loading is a significant threat to structure safety.Because such bonding is untypical adhesive joint,the issues are easy to be ignored.The r... |
| Keywords: | composite material integrated structure adhesive region out-plane tensile stress |
| 本文献已被 CNKI 等数据库收录！ | |