|
|||||
|
|
| 自适应约束条件下过型值点的连续Bezier曲线设计方法 | |
| 引用本文： | 杨俊茹,贾巧辉,张道忠,许宁.自适应约束条件下过型值点的连续Bezier曲线设计方法[J].机械设计,2011,28(10). |
| 作者姓名： | 杨俊茹 贾巧辉 张道忠 许宁 |
| 作者单位： | 1. 山东科技大学机械电子工程学院,山东青岛266510;山东大学材料科学与工程学院,山东济南250061 2. 山东科技大学机械电子工程学院,山东青岛,266510 3. 山东山大华天软件有限公司,山东济南,250101 |
| 基金项目： | 国际科技合作资助项目(2009DFB10010); 山东省优秀中青年科学家科研奖励基金资助项目(BS2009ZZ012); 山东省自然科学基金资助项目(ZR2010EM013) |
| 摘 要： | 已知Bezier曲线型值点,利用三点圆弧近似方法获得曲线端点的自适应约束条件,根据Bezier曲线端点性质和C2连续条件建立曲线型值点与其控制点之间的关系,采用高斯顺序消去法反算出曲线控制点,从而获得过型值点的连续Bezier曲线。基于该设计方法进行了实例研究,其结果与专业三维CAD软件在同样条件下的设计结果具有较好的一致性。 |
| 关 键 词： | Bezier曲线 型值点 自适应约束条件 控制点 C2连续 |
Design method of continuous Bezier curve for passing modal points under adaptive constraints |
|
| YANG Jun-ru,JIA Qiao-hui,ZHANG Dao-zhong,XU Ning.Design method of continuous Bezier curve for passing modal points under adaptive constraints[J].Journal of Machine Design,2011,28(10). | |
| Authors: | YANG Jun-ru JIA Qiao-hui ZHANG Dao-zhong XU Ning |
| Affiliation: | YANG Jun-ru1,2,JIA Qiao-hui1,ZHANG Dao-zhong3,XU Ning3(1.College of Mechanical & Electrical Engineering,SDUST Qingdao 266510,China,2.School of Material Science & Engineering,Shandong University,Jinan 250061,3.Shandong Hoteam Software Co.Ltd.,Jinan 250101 China) |
| Abstract: | In case that the modal points on the Bezier curve were given,the adaptive constraints of the curve endpoints were obtained by using three-point arc approximation method.The relationship between the modal points of the curve and their control points was established according to the endpoint behavior and C2 continuity of the Bezier curve.The control points in the curve were calculated reversely by the Gaussian elimination method in order,therefore the continuous Bezier curve passing modal points was designed ... |
| Keywords: | Bezier curve modal point adaptive constraint control point C2 continuity |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |