首页 | 本学科首页   官方微博 | 高级检索  
     

440MPa级高强IF钢的连续冷却相变规律
引用本文:王纯,赵爱民,苏岚. 440MPa级高强IF钢的连续冷却相变规律[J]. 机械工程材料, 2012, 0(2): 88-90,95
作者姓名:王纯  赵爱民  苏岚
作者单位:北京科技大学冶金工程研究院
基金项目:北京市科委重大项目(D07010300700701);国家“十一五”科技支撑计划项目(2006BAE03A06)
摘    要:利用膨胀仪和热模拟试验机测定了440MPa级高强度IF钢的静态和动态CCT曲线,并对其相变规律进行了分析。结果表明:在静态和动态转变的开始阶段均出现了铁素体组织,随冷速的提高出现了贝氏体铁素体组织,使转变产物晶粒细化;与静态转变相比,动态转变提高了奥氏体向铁素体转变的开始温度,促进了铁素体相变,使转变产物晶粒细化。

关 键 词:高强度IF钢  CCT曲线  冷却速率  相变

Continuous Cooling Phase Transformation Law of 440 MPa High-Strength IF Steel
WANG Chun,ZHAO Ai-min,SU Lan. Continuous Cooling Phase Transformation Law of 440 MPa High-Strength IF Steel[J]. Materials For Mechanical Engineering, 2012, 0(2): 88-90,95
Authors:WANG Chun  ZHAO Ai-min  SU Lan
Affiliation:(Research Institute of Metallurgy Engineering,University of Science and Technology Beijing,Beijing 100083,China)
Abstract:The static and dynamic continuous cooling transformation(CCT) curves of 440 MPa high-strength IF steel were tested by dilatometer and thermal simulation tester,and the phase transformation law of the steel was analyzed.The results show that ferrite appeared at the start stage of static and dynamic transformation,and bainite ferrite appeared with the increase of cooling rates and the grains of phase transformation product were refined.Comparing with static transformation,dynamic transformation increased the starting temperature of austentite transforming to ferrite,promoted ferrite phase transformation and refined the grains of phase transformation products.
Keywords:high-strength IF steel  continuous cooling transformation(CCT) curve  cooling rate  phase transformation
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号