| 基于LabVIEW的多传感器监测系统设计 |
| |
| 引用本文： | 徐亮亮,韩文波.基于LabVIEW的多传感器监测系统设计[J].工业控制计算机,2011,24(12):35+97-35,97. |
| |
| 作者姓名： | 徐亮亮 韩文波 |
| |
| 作者单位： | 长春理工大学光电工程学院仪器科学与技术,吉林长春,130022 |
| |
| 摘 要： | 基于LabVIEW的多传感器监测系统是以LabVIEW软件系统为平台,设计上位机软件对多传感器测得的数据进行监测、管理并时测得的数据进行保存.由于传感器的多种多样,系统通过两种方法获得传感器测得的数据:一是基于PCI的数据采集卡采集数据；另一种是由STC12C2052AD单片机进行采集数据,然后通过串口发送给上位机.对...
|
| 关 键 词： | LabVIEW 数据采集卡 STC 12C2052AD单片机 |
Design of Multi-sensor Monitoring System Based on LabVIEW |
| |
| Abstract: | The LABVIEW software system is acted as the platform of multi-sensor monitoring system based on LabVIEW,PC software is designed to monitor、manage and save the data measured by the multi-sensor.Because of the diversity of sensors,the system obtain the data from the sensor through two methods:the first is acquiring data through the PCI data acquisition card,the second is acquiring data by STC12C2052AD MCU and send them to the upper computer through a serial port.The data measured from sensors are acquired. |
| |
| Keywords: | LabVIEW Data acquisition card STC12C2052AD MCU |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
