| 基于MoldFIow的转向灯座塑件注射成型分析 |
| |
| 引用本文： | 王尚林,王树勋.基于MoldFIow的转向灯座塑件注射成型分析[J].模具制造,2012(7):18-21. |
| |
| 作者姓名： | 王尚林 王树勋 |
| |
| 作者单位： | 江门职业技术学院机电技术系,广东江门,529090 |
| |
| 摘 要： | 采用MoldFlow（MPI）对摩托车转向灯座塑件的注射成型过程进行了预测，并对两种注射模浇注系统方案从充填时间、翘曲变形的大小与产生原因、熔接痕位置、气穴位置等方面进行了比较，为下一步设计及改进模具提出了建议。
|
| 关 键 词： | 注射模 摩托车转向灯座 MoldFlow分析 流动 翘曲 |
The Analysis of Injection Molding of Steering Lamp Base Based on MoldFiow |
| |
| Abstract: | The forecast of injection molding of motor steering lamp base based on MPI in MoldFlow have been researched in this paper. The results of two mold injection system projects are compared, including the gate location, the filling time, the primary cause of wrap, the location of fusion seam and the air hole, etc. |
| |
| Keywords: | injection mold the steering lamp base of motor MoldFlow analysis flowing wrap |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
