A study of an autonomous mobile robot in an outdoor environment

This paper describes an experimental study of the fabrication of micro-mechanisms on a silicon wafer. Planar process technology developed in the industry of CMOS LSI was employed. The structural material is CVD-polycrystalline silicon with a thickness of 2.5 μm and the sacrificial material is CVD-SiO₂ with a thickness of 1.0 μm. In the experimental study, micro-rotors with a shaft and a cap in an assembled form were fabricated on a silicon wafer. The self-alignment process gave a tolerance of 1.0 μm between the rotor and the shaft. The maximum rotation speed observed was 9 x 10⁴ rpm by blowing nitrogen gas.