| Abstract: | A finite element approach has been used to obtain the stress distribution in some adhesive joints. In the past, a strength prediction method has not been established. Therefore in this study, a strength prediction method for adhesive joints has been examined. First, the critical stress distribution of single-lap adhesive joints, with six different adherend thicknesses, was examined to obtain the failure criteria. It was thought that the point stress criterion, which has been previously used for an FRP tensile specimen with a hole, was effective. The proposed method using the point stress criterion was applied to adhesive joints, such as single-lap joints with short non-lap lengths and bending specimens of single-lap joints. Good agreement was obtained between the predicted and experimental joint strengths. |
