| Abstract: | A metal hydride (MH) actuator uses the reversible reaction between heat energy and mechanical energy of a hydrogen-absorbing alloy and moves smoothly without any noise. Moreover, the actuator is compact, light and has adequate compliance. In this paper, some experiments concerning human motion patterns were carried out in order to adopt the MH actuator to the transfer aid system. The results were evaluated from a biomedical engineering viewpoint in order to obtain the optimal parameters for transferring the disabled from a bed to a wheelchair and vice versa (transfer aid). Sagittal plane kinematics, surface electromyographic signals (EMG) obtained from lower limbs, ground reaction forces and foot pressure distribution were measured using a three-dimensional motion analyzer. From the experimental results, it was found that the motion of the transfer aid was smooth when the initial angle of the ankle was 70°. The best initial angle of the trunk was also found to be about 45° while standing from a bed. However, the initial angle of the trunk was best at 60° when a person was in the process of sitting down on a wheelchair. Furthermore, a knee pad which supports the lower limbs requires flexibility in the range of 0.1-0.2 kgf/mm. |
