|
|||||
|
|
| 基于ANSYS的电主轴结构优化 | |
| 引用本文： | 宋春明,赵宁,张士勇.基于ANSYS的电主轴结构优化[J].机床与液压,2007,35(9):104-106. |
| 作者姓名： | 宋春明 赵宁 张士勇 |
| 作者单位： | 1. 陕西理工学院机械工程学院,陕西汉中,723003;西北工业大学机电学院,陕西西安,710072 2. 西北工业大学机电学院,陕西西安,710072 3. 陕西理工学院机械工程学院,陕西汉中,723003 |
| 摘 要： | 建立了某铣削用电主轴轴承-转子系统的参数化有限元模型,应用有限元分析软件ANSYS的优化设计功能,以提高电主轴的刚度为优化目标,对主轴的支承跨距和电机转子安装位置进行了优化计算,并对优化前后的主轴系统进行了模态分析,对比了其一阶自振频率的改变情况.结果表明:主轴结构优化后,其刚度和一阶自振频率均有一定程度的提高. |
| 关 键 词： | 电主轴 优化设计 ANSYS ANSYS 电主轴 结构优化 Based Spindle Electric Structure 程度 结果 情况 自振频率 模态分析 主轴系统 优化计算 安装位置 电机转子 支承跨距 优化目标 刚度 设计功能 |
| 文章编号： | 1001-3881（2007）9-104-3 |
| 修稿时间： | 2006-12-29 |
Optimized Design of the Structure of Electric Spindle Based on ANSYS |
|
| SONG Chunming,ZHAO Ning,ZHANG Shiyong.Optimized Design of the Structure of Electric Spindle Based on ANSYS[J].Machine Tool & Hydraulics,2007,35(9):104-106. | |
| Authors: | SONG Chunming ZHAO Ning ZHANG Shiyong |
| Abstract: | An electric spindle used for milling was discussed, a parameterized FEA model of bearing-rotor system established in ANSYS was given, choosing the stiffness of spindle as the optimizing target, its bearing span and the location of the motor were calculated by using the optimized function integrated in ANSYS, and modal analysis on fore-and-aft spindle system was made, then the change of its first set inherent frequency was compared. The result reveals its stiffness and first set inherent frequency both have a certain extent of increase. |
| Keywords: | Electric spindle Optimized design ANSYS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |