| 铝合金端盖压铸模设计 |
| |
| 引用本文： | 王明杰,刘雪华,王火生,刘建仁. 铝合金端盖压铸模设计[J]. 铸造技术, 2006, 27(7): 740-742 |
| |
| 作者姓名： | 王明杰 刘雪华 王火生 刘建仁 |
| |
| 作者单位： | 1. 福建工程学院机电及自动化工程系,福建,福州,350014
2. 福州安远精密制模有限公司,福建,福州,350014 |
| |
| 摘 要： | 分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。为了使铝合金充型平稳，提高铝合金的材料利用率，同时方便进行加工，采用了分支式横浇道的设计，很好地满足了模具的设计要求。经实际生产检验，该模具在使用过程中操作方便、安全，工作稳定可靠，铸件质量达到要求。
|
| 关 键 词： | 铝合金 端盖 压铸模 |
| 文章编号： | 1000-8365（2006）07-0740-03 |
| 收稿时间： | 2006-05-08 |
| 修稿时间： | 2006-05-11 |
Design of Die-Casting Die for Aluminum Alloy Cover |
| |
| WANG Ming-jie,LIU Xue-hua,WANG Huo-sheng,LIU Jian-ren. Design of Die-Casting Die for Aluminum Alloy Cover[J]. Foundry Technology, 2006, 27(7): 740-742 |
| |
| Authors: | WANG Ming-jie LIU Xue-hua WANG Huo-sheng LIU Jian-ren |
| |
| Affiliation: | 1. Fujian University of Technology, Fuzhou 350014, China; 2. Fuzhou Anyuan Mold Co. , Ltd, Fuzhou 350014, China |
| |
| Abstract: | The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced. In order to fill mold steadily, enhance a availability ratio of aluminum alloy and facilitate manufacturing the die easily, the design of branch runner system was adopted, and it can satisfy the design requirement of mold very well. After the trial in actual production, it is proved that the die is convenient to operate, safe and reliable, and the casting quality can meet the requirements. |
| |
| Keywords: | Aluminum alloy Cover Die-casting die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
