Effect of carbon content on plastic flow behaviour of plain carbon steels at elevated temperature

Abstract

In the present study the effect of carbon composition on the hot flow behaviour of two different plain carbon steels is analysed. For this purpose the constitutive equations describing the stress–strain (σ–?) relationships at a given strain rate ? and temperature T were determined for each steel. Uniaxial hot compression tests were performed to characterise the mechanical behaviour of the alloys. It was observed that irrespective of the test conditions, the low carbon steel displayed similar flow stresses to the high carbon steel. Comparison of the characteristic parameters of the constitutive equations describing the high temperature flow behaviour of these steels, together with values reported in the literature enabled determination of the effect of carbon content on flow behaviour. It has been found that flow stresses can be rationalised as a balance between work hardening and softening processes (basically dynamic recovery). At high temperatures and small strain rates, the high carbon steel showed lower hardening rates and slower dynamic recovery kinetics than the low carbon steel. In contrast, at low temperatures and large strain rates, the high carbon steel displayed higher hardening rates and recovery rates than the low carbon steel.