| 涂层硬质合金刀具干式切削淬硬钢的试验研究 |
| |
| 引用本文： | 倪俊芳,苏桂生,谢志余.涂层硬质合金刀具干式切削淬硬钢的试验研究[J].中国制造业信息化,2001,30(5):56-57. |
| |
| 作者姓名： | 倪俊芳 苏桂生 谢志余 |
| |
| 作者单位： | 苏州大学机电工程系 |
| |
| 摘 要： | 通过采用涂层硬质合金刀具对淬硬 4 5钢硬态干式切削试验 ,分析硬态干式切削淬硬钢的特点 ,研究了涂层硬质合金刀具及其几何参数的优化 ,讨论了涂层硬质合金刀具磨损形式、刀具耐用度及加工表面粗糙度 ,得出了可应用于实际干式切削加工的切削条件和参数
|
| 关 键 词： | 涂层硬质合金刀具 硬态干式切削 刀具耐用度 表面粗糙度 |
| 文章编号： | 1007-9483(2001)05-0056-02 |
| 修稿时间： | 2001年3月5日 |
An Experimental Research on Dry Cutting of Hardened Steel by Coated Carbide Tools |
| |
| NI Jun-fang,SU Gui-sheng,XIE Zhi-yu.An Experimental Research on Dry Cutting of Hardened Steel by Coated Carbide Tools[J].Manufacture Information Engineering of China,2001,30(5):56-57. |
| |
| Authors: | NI Jun-fang SU Gui-sheng XIE Zhi-yu |
| |
| Abstract: | The hardened 45 steel is cut without coolant by using of four types coated carbide tools,where the effect of the geometry and the coating of cutting tools is investigated on its cutting performance.Based on the analysis of the tool wear,the tool life and the surface roughness,a practical dry cutting condition is finally obtained. |
| |
| Keywords: | Coated Carbide Tools Dry Cutting Tool Life Surface Roughness |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
