| 铝合金壳盖压铸工艺优化研究 |
| |
| 引用本文： | 刘春生,杨军,艾秀兰,王鑫,王忠.铝合金壳盖压铸工艺优化研究[J].模具工业,2011(9):59-64. |
| |
| 作者姓名： | 刘春生 杨军 艾秀兰 王鑫 王忠 |
| |
| 作者单位： | 大连交通大学材料科学与工程学院;沈阳铸锻工业有限公司; |
| |
| 摘 要： | 通过对铝合金壳盖压铸件进行实体造型,采用铸造数值模拟软件Z-Cast对铝合金壳盖压铸过程的压力场、速度场和温度场进行数值模拟,根据模拟结果分析浇注系统和溢流槽尺寸的合理性,重新设计、优化浇注系统的形状和布置位置,得到合理的压铸方案。对于铝合金压铸件结构和压铸工艺设计有着重要的指导意义。
|
| 关 键 词： | 铝合金壳盖 压铸工艺 数值模拟 压铸模 |
Optimization of die casting process for aluminum alloy shell cover |
| |
| LIU Chun-sheng,YANG Jun,AI Xiu-lan,WANG Xin,WANG Zhong.Optimization of die casting process for aluminum alloy shell cover[J].Die & Mould Industry,2011(9):59-64. |
| |
| Authors: | LIU Chun-sheng YANG Jun AI Xiu-lan WANG Xin WANG Zhong |
| |
| Affiliation: | LIU Chun-sheng1,YANG Jun1,AI Xiu-lan1,WANG Xin1,WANG Zhong2(1.School of Material Science and Engineering,Dalian Jiaotong University,Dalian,Liaoning 116028,China,2.Shenyang Casting and Forging Industry Co.,Ltd,Shenyang,China) |
| |
| Abstract: | Numerical simulation was carried out on the field of pressure,velosity and temperature of the die casting for an aluminum alloy shell cover based on its solid modeling and by using Z-Cast software.The gating system and overflow tank size were analyzed;the shape and location arrangement of the gating system were redesigned and an optimized die casting scheme was obtained. |
| |
| Keywords: | aluminum alloy shell cover die casting process numerical simulation die casting die |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
