| 激光搭接再重叠扫描熔覆镍基纳米WC/Co层的显微组织 |
| |
| 引用本文： | 张光钧,李文戈,吕灵宾,朱屹峰.激光搭接再重叠扫描熔覆镍基纳米WC/Co层的显微组织[J].金属热处理,2009,34(2). |
| |
| 作者姓名： | 张光钧 李文戈 吕灵宾 朱屹峰 |
| |
| 作者单位： | 1. 上海工程技术大学,激光工业技术研究所,上海,201620
2. 上海工程技术大学,材料工程学院,上海,201620 |
| |
| 基金项目： | 国家自然科学基金面上项目，上海市教委曙光计划，上海市教委重点学科资助项目 |
| |
| 摘 要： | 采用CO2激光在45钢表面制备镍基纳米WC/Co熔覆层.使用搭接再重叠扫描工艺,突破了单道激光熔覆处理区域较窄的局限性以及搭接熔覆层中的碳化物形态多样性和分布不均匀性较大的缺陷.搭接再重叠扫描层硬度不下降且不出现新的裂纹和孔洞,这使大面积激光熔覆的实际应用成为可能.研究结果表明,搭接再重叠扫描的熔覆层中仍然存在相当数量的粒度≤100 nm的碳化物颗粒,其纳米效应对该熔覆层的抗裂止裂起了重要作用.
|
| 关 键 词： | 激光搭接熔覆 激光重叠熔覆 显微组织 纳米效应 |
Microstructure of nickel based nanometer WC/Co coating prepared by laser overlapping and scanning again cladding |
| |
| ZHANG Guang-jun,LI Wen-ge,L Ling-bing,ZHU Yi-feng.Microstructure of nickel based nanometer WC/Co coating prepared by laser overlapping and scanning again cladding[J].Heat Treatment of Metals,2009,34(2). |
| |
| Authors: | ZHANG Guang-jun LI Wen-ge L Ling-bing ZHU Yi-feng |
| |
| Affiliation: | 1.Laser Industrial Technology Research Institute;Shanghai University of Engineering Science;Shanghai 201620;China;2.School of Materials Engineering;China |
| |
| Abstract: | CO2 laser was adopted to prepare nickel based nanometer WC/Co composite coating on the surface of 45 steel.Laser overlapping and scanning again was used to break the limitation of single channel laser cladding and the defect from the large difference of the carbides in shape and distribution after single overlapping.The results show that the hardness of laser overlapped and scanning again clad coating is not lowered and at the same time no new cracks and pores appear,it makes the practical application of br... |
| |
| Keywords: | laser overlap cladding laser scanning again cladding microstructure nanometer effect |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
